HOW TO USE YOUR ROSSM WALLET

 

 

Step 1: Slide the cards into the tapered top groove. Place your most used cards at the front and/or back of the wallet for quick and convenient access.

Step 2: To access a card, press in the half-circle indentation so the cards are sticking slightly out of the top. To remove one of the middle cards fan them out or pull all the cards from the top so they are about halfway out and pinch the bottom of the wallet to separate them, then select the card you want.

Step 3: Slide your card back into its designated spot. If you push in the half-circle indentation slightly, exposing the cards already in the wallet, it may be easier to insert the additional card into the top tapered groove.

Step 4: Fold your cash and slide it in and out without lifting the money clip.

Pro Tips:

* Please allow a few days for the wallet bands to become smoother and elastic. Removing a specific card will become easier after a few days practice.

* Use the extra screws as a replacement only in case something happens to the existing ones.

* Place your most used cards at the front and/or back of the wallet for quick and convenient access.

* For the middle cards use one of this methods:

FANNING

PINCHING

HOW TO REMOVE THE MONEY CLIP

Step 1: Remove the top four screws on the money clip side.

Step 2: Push up on the bottom of the clip until it comes out.

Step 3: Gently replace the screws back to the original position.

HOW TO REPLACE THE MONEY CLIP FOR THE CASH STRAP

Step 1: Remove the seven screws on the money clip side. The side panel will become loose. Remove the money clip.

Step 2: Place the elastic cash strap provided around the loose side panel and center it.

Step 3: Put the loose panel back to its original position with the cash strap centered. Pinch and squeeze the side plate against the RFID metal plate to facilitate the screwing back into place. Start with the corners first and then the middle screws. Finally, gently tighten all 7 screws.

Optional: Carefully place the extra cash strap metal buckle piece on the cash strap to help secure the bills.

HOW TO REPLACE THE INNER ELASTIC BAND

Step 1: Remove all seven screws from the front and back plate. Remove the front and back plate.

Step 2: Remove the elastic from inner RFID metal plates and replace it with the new one.

Step 3: Place back the front and back plate and all the screws.

MONEY CLIP + CASH STRAP (COMPLETE VERSION)

Step 1: Remove the seven screws on the front side with logos of the wallet. The side panel will become loose.

Step 2: Place the elastic cash strap provided around the loose side panel and center it.

Step 3: Put the loose panel back to its original position with the cash strap centered. Pinch and squeeze the side plate against the RFID metal plate to facilitate the screwing back into place. Start with the corners first and then the middle screws. Finally, gently tighten all 7 screws 

WATCH THIS QUICK INSTRUCTIONAL VIDEO TO LEARN MORE ABOUT YOUR ROSSM WALLET

 

 

Need help?

If you encounter any issues on how to use or modify your wallet, please do not hesitate to contact our customer service team.